|
|
| |
Value Your Total Network Solution with the JetNet 6524G Full Gigabit Stackable Managed Layer3 Switch!
Korenix is pleased to announce JetNet 6524G, the gigabit Layer3 Managed Switch equipped with 24 full gigabit ports and 4 Gigabit SFP combo ports. Designed to meet the demands of intelligent transportation system networks, it allows managing routing between different network segments and thus improving the efficiency, safety and quality of service of the transportation system. With its 8 unit stackability, secured stack cable and 2 10G stack backplane, users can easily and flexibly expand the gigabit port volume without changing the environment.
New
|
Key features of JetNet 6524G:
- 24-port 10/100/1000 BaseT ports with 4 Gigabit SFP combo ports
- 2 10-G stacking CX4 connectors, up to 8 units stackable
- Support IP, VLAN & Multicast routing
- IP Routing protocol supports RIP v1 / v2, OSPF v1/v2
- Support L3 Multicast, PIM-DM and PIM-SM, DVMRP , IGMP v1/v2/v3
- Virtual Redundant Router Protocol (VRRP)
- 802.1s Multiple Spanning Tree Protocol and 802.1w RSTP
- Support 512 VLANs, GVRP/GMRP, protocol VLAN
- 802.3ad LACP, up to 6 trunk groups, unicast and multicast load balance
- Support L2 / L3 / L4 ACL (access control list)
- IEEE 802.1x Port-Based Authentication, RADIUS and TACACS client, SSH, SSL, TLS, Port binding
|
Huge Network Capacity
TheJetNet 6524G with 24 full gigabit fast Ethernet ports and 4 Gigabit SFP combo ports delivers maximum throughput and flexibility for high-density and ultra high-speed connection. With stacking cable installation, up to 8 units can be stacked together, allowing building a single-IP manageable device and simultaneously providing 40G backplane across full duplex stacking links. With its flexible interface the JetNet 6524G supports up to 192 Gigabit ports per stack and 384G bandwidth.
Easy Stack Management
The simplified stack management interface of JetNet 6524G access level switch provides abundant advantages for administrators reducing their workload by the management of whole stack as a single switch, configuring the precedence of each stack member and facing no any topology recovery problem.
Triple Layer 3 Routing (IP, VLAN and Multicast routing)
A single JetNet 6524G switch with the IP forwarding table gives users the possibility of configuring multiple IP subnets, assigning them to the physical interface.
Korenix JetNet 6524G outstands from other layer3 switches by combining multicast routing, in addition to its IP and VLAN routing features. These multicast routing protocols allow routing multicast streams, such as movies, videos, industrial automation streams through different subnets.
VRRP Layer 3 Default Gateway Redundancy
To ensure the high reliability of an environment, the JetNet 6524G supports the VRRP (Virtual Router Redundancy Protocol) protocol allowing the hosts to continuously direct traffic to the default gateway without the default gateway configuration change.
Taking full advantage of these features, JetNet 6524G can find its various applications in collision avoidance systems, automatic road enforcement, vehicle notification systems and other traffic control systems.
|
| |
Korenix JetIO Series’ New Peer-to-Peer I/O Feature Enhances Flexibility by Effective Network Communication!
Korenix releases new JetI/O firmware to support advanced peer-to-peer remote I/O function. With this enhancement, all JetIO modules can interact with one another in a flexible, effective manner.
The Most Flexible Discrete I/O
All JetIO series, including analog input, analog output, temperature detection, digital input/output models, support the advanced peer-to-peer I/O function. The logic result of IO channels from one JetIO device can be sent to more than one peer JetIO devices without additional intermediate controller and thus modify their channel status. The communication is very flexible, including “one-to-one”, “one-to-many”, “many-to-one”, as well as “many-to-many” scenarios. With their flexible design, the AO/DO/Counter/Pulse channels can react to the AI/Temperature/DI/Counter channels remotely.
Effective, Truly Remote Peer-to-Peer I/O
While most Ethernet I/O products in the market support limited peer-to-peer function and communicate with one another by broadcast, all Korenix JetIO series support peer-to-peer function, thus communicating more effectively. Unlike broadcasting communication, where the broadcast packets are limited within a LAN segment, each JetIO device with advanced peer-to-peer I/O function can configure with up to 8 Unicast IP addresses of the peers. This greatly reduces network traffic, saves all devices’ computing power, as well as makes peer-to-peer activity across a LAN segment easily.
Easy Configuration by Web GUI
All the configurations can be done through either the JetIO window utility or the GUI web page. Users can enjoy the flexibility of the advance peer-to-peer function easily.
|
Major features of JetIO models are:
- Flexible peer-to-peer I/O through one-to-one, one-to-many, many-to-one, and many-to-many communication
- Unicast for network efficiency and true remote I/O
- Free OPC server
- Support Modbus/TCP, window utility and GUI web page for easy configuration
- Operating temperature -25~70℃
- IP31 case protection
|
JetIO 6500 series  |
In addition to the already flexible and rugged design of JetIO, these features make the interoperable and cost-effective JetIO series the best choice for environmental monitoring, transportation systems, building and home automation, as well as for applications in emerging security and surveillance markets.
JetBox 9300, the 5-in-1 Networking Computer for a Simple and Secure Network Construction!
Focusing on the high-end IP-based surveillance market, JetBox 9300, the Korenix patented Networking Computer, combines Router, Managed Ethernet Switch, Serial Device Server and Digital I/O Controller functions into a tiny box. The versatile features of JetBox 9300 make it the most suitable model for advanced security and IP surveillance integration.
The 5 key features of JetBox 9300 are:
1. Industrial Computer: JetBox 9300 is a RISC-based embedded computer. The built-in Linux OS and essential network applications make it a powerful security and IP surveillance engine. JetBox Linux SDK is also provided for users to develop their own security and surveillance applications.
2. Router: JetBox 9300 has one WAN port and four LAN ports by default. With its IP routing, NAT and DMZ features, video streams can be routed to internet, which makes multi-site surveillance feasible.
3. 5-port 10/100TX Managed Ethernet Switch: JetBox 9300 can also be configured as a 5-port Managed Ethernet Switch, which acts as a network platform for security control and surveillance monitoring.
4. 4-port Serial Device Server: JetBox 9300 has 4 serial interfaces to connect to access and security control devices, such as card readers, cameras, speakers. JetBox 9300 also supports serial-to-Ethernet technology to read and remotely control the RS232/422/485 interfaces through Ethernet.
5. Digital I/O Control: Digital I/O devices are basic elements of security control. JetBox 9300 carries 4 DI and 4 DO channels for user to integrate alarms, indicators, and sensors into their security system.
In addition to the 5-in-1 strength, JetBox 9300 is designed to work in harsh environments, such as the wide-temperature condition in open-pit mines and vibration on railcars. With JetBox 9300, advanced security and IP surveillance can be integrated in a compact small box for use in railway, airport, harbor, public utilities, and mining areas.
|
|
| |
|
|
|
|
 |
