|
Overview
Specifications
Ordering Information
 Datasheet
|
2 LAN, 4 Serial Linux Computer
- RISC CPU low power consumption
- -40~ 80°C operating temperature, fanless
- Linux programming
- Linux customized configuration auto-run via SD card
- 4-port serial: TCP server mode
- Digital I/O controller: 4 DI & 4 DO, DIO scheduling
- SNMP control
- Modbus gateway (optional)
|
Embedded Linux Ready
Korenix is devoted to the Linux computing and benefits
customers by providing the JetBox series
with embedded Linux ready system and easy-to-use
interface. Compared to general purpose Linux
system, embedded Linux is performance-optimized
for front-end industrial control.
Linux Auto-run
The JetBox 5300 support Korenix Auto-Run
customization setting on SD card. The advanced software feature allows users to configure their
own Linux commands once the system is booted.
Users only need to store the commands on
an "Auto-Run" file and then store it on an SD
card. This way they can automatically run specific
configurations or run specific applications in the
JetBox 5300 embedded computers making the
industrial network management easier and more
flexible.
RISC-Based Computer with low power
consumption
The JetBox5300 is a RISC-based computer with
lower power consumption and is stable and reliable. The JetBox5300 carries 2 LAN ports, 2 USB ports, 2 RS232/422/485, 2 RS232, 4 digital inputs
and 4 outputs to be the best solution in industrial
control.
Dual power inputs
The JetBox 5300 carries dual power inputs to make
a power redundancy to reduce the impact of unstable
power inputs.
Digital Input & Output
Digital inputs and outputs are widely used in
industrial applications such as indicators, alarms,
reed switches, or sensors. The compact JetBox
carries 4 digital output and 4 digital input channels
and work as a front- end control agent.
Modbus Gateway (Optional)
For Modbus control applications, Korenix also
provides the optional Modbus Gateway function on
the SD card. This value-added software enables
serial Modbus RTU (or Modbus ASCII) devices to communicate with Modbus TCP devices. It is an open
serial communication protocol based on master/
slave architecture and used to connect a supervisory
computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA).
Dimensions (Unit = mm)
|
