JetCard 2215 Overview

Overview Specifications Ordering Information Datasheet

4 PoE, 1 LAN, 12~24V Booster Switch Universal PCI Card  Support 32 bit Universal PCI bus One 12~24V DC input powers PCI card and PoE ports 4 ports PoE, IEEE 802.3af compliant, deliver 15.4W per port Unmanaged switch function IEEE 802.3 10 Base-T and 100 Base-Tx compatible Full or half duplex at 10/100 Mbps IEEE 802.3u Auto-Negotiation supported

The JetCard 2215 is a flexible and high performance five-port Ethernet PoE switch card in Universal PCI format. The easy-to-install drivers that come with JetCard make it easier for you to set up your complex system. JetCard 2215 is ideal embedded networking solution for industrial applications.

12~24V DC Power Module to power system and PoE Function: On board power module to adopt 12~24V DC input and then provides +3.3V and +5V for PCI card system use and boosts to 48V for PoE function.

IEEE 802.3af Power over Ethernet: The JetCard is IEEE802.3af standard compliant and works as a PSE (power sourcing device) to deliver 15.4W per port.

Unmanaged Ethernet Switch Function: The JetCard 2215 uses Marvell 88E6065 chip to provide 5 Ethernet ports. Each Ethernet port in the JetCard offers IEEE 802.3 10 Base-T and 100 Base-Tx compliant Ethernet data transmission with auto MDI/MDI-X and auto-negotiation.

Auto MDI/MDI-X: The JetCard automatically determine whether or not it needs to interchange cable sense between pairs so that an external crossover cable is not required. If the JetCard interoperate with a device that cannot automatically correct for crossover, the JetCard makes the necessary adjustment prior to commencing Auto-Negotiation.

Flow control: The JetCard supports back- pressure and pause frame-based flow control schemes to
ensure zero packet loss under temporary traffic congestion.

Dimensions (Unit = mm)