JetCon 2201-w/2201-iw Specifications

Overview Specifications Ordering Information Datasheet

Industrial RS-232 to RS-422/485 Rail Converter   Automatic RS-232 to RS-422/485 converter Auto Baud rate and direction control High Speed 921.6Kbps 3000V RS-485/422 isolation protection RX bias and terminal resistor selection Easy Configure without power resetting -40~70C wide operating temperature   (JetCon 2201-iw)

Technology
Standard	EIA/TIA-232 RS-232 (ITU-T v.28) EIA/TIA-422 RS-422 (ITU-T v.11) EIA/TIA-485 RS-485 (ISO/IEC8284)
Interface
Forwarding Rate	Auto baud rate 300 to 921.6Kbps
Port	RS-232 x1 RS-422 x1 RS-485 2/4 wire x1
Connector	RS-232: DB-9 Female RS-422/485: Removable terminal block
Link Distance	RS-232: 50 feet RS-422: 4000 feet RS-485: 4000 feet
Serial Signals	RS-422: TxD+, TxD-, RxD+, RxD- RS-485 4 wires: TxD+, TxD-, RxD+, RxD- RS-485 2 wires: Data+, Data- Signal Ground
Configuration DIP Switch	DIP-switch 1,2: RS-422/485 wiring mode selection. DIP-switch 3,4: RS-422/485 line terminator selection. DIP-switch 5,6: RS-422/485 biasing resistor selection.
Diagnostic LED	System power (Pwr): Green Receive Data (Rx):Yellow blinking Transmit Data (Tx): Green blinking
Power Requirements
System Power	DC 12~48V input with polarity reverse correction.
Power Consumption:	1 Watt (max.)
Mechanical
Installation	Wall mount or DIN Rail mount
Case	Aluminum metal case
Dimensions	24.7mm(H) x 74mm (W) x99 mm (D)
Weight	0.24kg with package 0.15kg without package
Environmental
Operating Temperature	-40 to 70°C
Operating Humidity	0% to 90% (Non-condensing)
Storage Temperature	-40 to 80°C (-40 to 176°F)
Storage Humidity	0%~ 95% non-condensing
Regulatory Approvals
EMI	FCC class B, CE/EN55022 class B CE/EN61000-3-2:2001 Harmonic test CE/EN61000-3-3: 1995 Flicker test
Shock	IEC60068-2-27
Vibration	IEC60068-2-6
Free Fall	IEC60068-2-32
MTBF	5366,967 Hours ,MIL-HDBK-217F
Warranty	5 Years