JetCon 2302 Specifications

Overview Specifications Ordering Information Datasheet

Industrial 2-Channel Fast Ethernet to Fiber Media Converter  Two Channels 10/100 TX to 100 FX media converter Two 10/100TX with 2 100FX Fast Ethernet Fiber Switch Supports Auto MDI/MDI-X, Auto Negotiation Supports Multi-mode 2KM, Single-mode 30KM 3.2Gbps Non-Blocking Switch Fabric Auto Link Loss Forwarding (LLF) for fault detection Power and Port event alarm Redundant 10~60V DC Power inputs with DC polarity protection NEMA -TS2 Compliance (applying) Aluminum case with IP-31 grade protection Supports 1.5KV Hi-Pot isolation protection Operating temperature -25°C~75°C for hazardous environment application (-40°C~75°C wide operating temperature model available by request)

Technology
Standard	IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3u 100Base-FX IEEE 802.3x Flow Control and Back Pressure
Forwarding Technology	Store and Forward
Link Lose Forwarding	Supports Bi-directional Link Loss Forwarding function (Converter mode only)
Switch Technology	3.2 Gbps Store and Forwarding Technology
System forwarding performance	1.19 Mega packets per second, 64 bytes packet size. (Switch Mode) 14880 pps for 10Base-T 148810 pps for 100Base-TX/ FX
Mac address	1K MAC address entries with automatic learning and aging (Switch Mode only)
Packet Buffer	512Kbits shared memory
Operating Mode	Converter/ Switch mode selected by DIP switch Switch Mode: data exchange on 4 ports (Channel A, B exchange) Converter mode: data forwarding on independent channel (A, B)
Digital Output	Dry Relay Output with 1A @24V DC ability
Interface
Number of Ports	Ethernet copper port: 2 × 10/100TX ports with Auto MDI/MDI-X, Auto Negotiation. Fiber port: 2 × 100Mbps Fiber port, SC or ST (optioned). JetCon 2302f-mm: Multi-mode (Channel A,B) JetCon 2302f-ss : Single-mode (Channel A,B) JetCon 2302f-ms : Multi-mode (Channel A), Single-mode (Channel B)
Power	Removable Terminal Block
Relay	Removable Terminal Block
Core	RJ-45 Ethernet port : 100 Meters 10Base-T: 2-pairs UTP/STP Cat-3,4 TIA/EIA 568-B cable 100Base-TX : 2/4 pairs UTP/STP Cat.5 TIA/EIA 568-B cable Multi-mode fiber Cable: 2KM distance, 50~62.5/125um. Single-mode fiber Cable: 30KM distance,8~10/125um.
Reset Button	For Operating mode change & LLF function activation
Diagnostic LEDs	System Power (Green on) : Power 1 , 2 Relay Alarm: Active (Red) Link Loss Forwarding : Enable (Green on) Op. Mode: Convert (Green on) Fiber Ethernet Port(Channel A/B): Link/Activity (Green on/Yellow Blinking) Ethernet Port: Link/Activity (Green on/Yellow Blinking)
DIP Switch	DIP Switch 1: CH. B Fiber link event alarm control, Enable(On)/ Disable (Off) DIP Switch 2: CH. A Fiber link event alarm control, Enable(On)/ Disable (Off) DIP Switch 3: CH. B Copper link event alarm control, Enable(On)/ Disable (Off) DIP Switch 4: CH. A Copper link event alarm control, Enable(On)/ Disable (Off) DIP Switch 5: Operating mode select, Converter mode (On)/ Switch mode (Off) DIP Switch 6: Link Loss Forwarding control, Enable(On)/ Disable (Off) DIP Switch 7: Power Event Alarm Control, Enable(On)/ Disable (Off)
Power Requirements
Power Supply	DC 10~60V with polarity reverses correction. Supports Positive/Negative power system
Power Consumption	6Watts / DC 24V
Mechanical
Installation	DIN Rail
Casing	IP31 protection, aluminum case
Dimensions	99 (D) x55(W)x 120(H), unit:mm (without Din-rail kit)
Weight	To be update
Environmental
Operating Temperature	-25~ 75°C (JetCon 2302-w:-40~ 75°C)
Operating Humidity	0% to 95% (Non-condensing)
Storage Temperature	-40 to 75°C
Storage Humidity	0% to 95% (Non-condensing)
Regulatory Approvals
EMI	CE/EN 55022 class A, FCC Class A, Compliance with EN 50155 EMI EN 61000-3-2:2006, EN 61000-3-3, EN 61000-6-2
EMC	CE/ EN 55024, EN 61000-6-4, Compliance with EN 50155 EMS IEC 61000-4-2,IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,IEC 61000-4-6, IEC 61000-4-8
Safety	Hi-pot Testing – AC 1.5KV
Shock	IEC 60068-2-27
Free Fall	IEC 60068-2-32
Vibration	IEC 60068-2-6
MTBF	To be update