JetCon 3401G Specifications

Overview Specifications Ordering Information Datasheet

Industrial Gigabit Ethernet Media Converter Converts 10/100/1000TX to Gigabit Fiber Flexible SFP Fiber transceiver design Auto Fault Detection and Alarm Fault Alert for port and power Two way Link loss forwarding Power redundancy with wide range input IP-31 grade protection with wide range operating temperature 1.5KV Hi-Pot testing passed

Technology
Standard	IEEE802.3 10Base-T IEEE802.3u 100Base-TX IEEE802.3at 1000Base-T IEEE802.3z Gigabit Ethernet Fiber IEEE802.3x flow control and back-pressure. IEEE802.1p Class of Service IEEE802.1Q Quality of Service
Performance
Forwarding Technology	Store and Forward technology with 64 ~1536 bytes packet forwarding ability
System Throughput	1.49Mpps
Packet buffer	2.75Mbits
Link Loss Forwarding	Two-way loss-signature auto forwarding, configured by DIP switch
Event Alarm	Configurable relay alarm output for port or power events
Interface
Number of Ports	1 x 10/100/1000 Base-TX with Auto MDI/ MDI-X function, Auto-Negotiation 1 x SFP socket with hot-swappable function for Gigabit Ethernet SFP Transceiver
Connector	10/100/1000 Base-TX: RJ-45 SFP socket: support 3.3V Gigabit Ethernet 1.25Gbps Fiber Transceiver. Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output
Cables	RJ-45 Connector: 4 pairs of Cat-5 UTP/STP cable with EIA/TIA 568B type conductor arrangement for 1000Base-T. Maximum link distance is 100meters
Configuration DIP Switch	DIP 1: Port Event Alarm Enable/Disable DIP 2: Power Event Alarm Enable/Disable DIP 3: Link Loss Forwarding Enable/Disable
Core	RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters. SC connector: supports multi-mode or single-mode optical fiber Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM
Diagnostic LED	System: Power (Green) x2 ,Link Loss Forwarding (Red) x1, Alarm (Red) x1 RJ-45 port: Speed (Green): On (1000Mbps Link), Blinking (100Mbps Link), Off (10Mbps Link or disconnect). Link/Activity (Green): On (Link), Blinking (Activity) Full Duplex/Collision (Yellow): On (link at full duplex mode), Blinking ( Collision) SFP port: Link/Activity (Green): On (Link), Blinking (Activity) Full Duplex/Collision (Yellow):On (link at full duplex mode), Blinking ( Collision)
Power Requirements
System Power	DC 24V (12~48V) with polarity reverse correction and over current protection
Power Consumption	8 Watts @ DC 24V(Maximum)
Mechanical
Installation	DIN Rail or Wall Mount
Case	Aluminum alloy metal case with grade 31 of ingress protection
Dimensions	120mm(H) x 55mm (W) x108 mm (D) ( with DIN rail clip)
Environmental
Operating Temperature	-25 to 70°C
Operating Humidity	0% to 95% (Non-condensing)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Storage Humidity	0%~ 95% (non-condensing)
Regulatory Approvals
Hi-Pot	1.5KV on port to port and port to power
EMI	FCC Class A, EN55022
EMC	EN61000-4-2, EN61000-4-3, EN61000-4-4 , EN61000-4-5, EN61000-4-6, EN61000-4-8, EN610004-11
Safety	CE/EN60950
Shock	IEC 60068-2-27
Free Fall	IEC 60068-2-32
Vibration	IEC 60068-2-6