JetNet 3010G/3010GT Specifications

Overview Specifications Ordering Information Datasheet

Industrial 10-port Gigabit Ethernet Switch 7 10/100 TX ports and 3 Gigabit RJ-45/SFP combo ports 32Gbps Switch Fabric with excellent data exchange performance Auto Gigabit RJ-45/SFP module detection IEEE 802.1p for Quality of Service (QoS) Aluminum case with IP-31 grade protection -20~70°C operating temperature for hazardous environment application

Technology
Standard	IEEE802.3 10Base-T IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z Gigabit Ethernet Fiber IEEE802.3x flow control and back pressure IEEE802.1p Class of Service
Performance
Switch Technology	Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput	14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
Transfer packet size	64 bytes to 1522 bytes (with VLAN Tag)
MAC Address	8K MAC address table
System Packet Buffer	1Mbits shared packet buffer
Quality of Service	Compliance with IEEE802.1p class of service with Tag Based Priority rule Per switch port provides 4 priority queues with 8 (Higher):4(High):2(Low):1(Lower) scheduling. The Tag Priority ID as following: Higher (6,7), High (4,5), Low (0,3), Lowest (1,2)
Interface
Configuration	7 x 10/100 Base-TX with Auto MDI/MDI-X function Auto-Negotiation 3 x 1000Base-T supports Auto MDI/MDI-X , Auto-Negotiation function and combo with Small Form Factor Package (SFP) socket
Connectors	10/100 Base-TX: RJ-45 1000Base-T: RJ-45 SFP: supports all 3.3v SFP type Gigabit fiber transceiver Power: 4-Pin Removable Terminal Block connector
Cables	RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters
Diagnostic LED	System Power: Power 1 (Green), Power 2 (Green) 10/100 Mbps RJ-45 port: Link/Activity (Green), Full Duplex/ Collision (Yellow) port: Link/Activity(Green) 1000Base-T RJ-45 port: Link/Activity (Green) SFP port: Link/Activity (Green)
Power Requirements
Power Supply	4 pins terminal block for power input. DC 24V (12~48V) with polarity reverse protection and redundant function
Power Consumption	11.5 Watts @ DC 24V(Maximum)
Mechanical
Installation	DIN-Rail mount or Wall Mount
Casing	Aluminum metal case with IP31 grade case protection for drop-waterproof and dustproof
Dimensions	137.85mm(H) x 96mm (W) x 132mm (D)( with DIN rail clip)
Dimensions	0.875g without package
Environmental
Operating Temperature	-20 to 70°C
Operating Humidity	0% to 95% (Non-condensing)
Storage Temperature	-40 to 85°C
Storage Humidity	0%~ 95%, (non-condensing)
Hi-Pot	1.2KV on port to port and port to power
Regulatory Approvals
EMI	EN55022 CLASS A, EN61000-3-2, EN61000-3-3, EN61000-6-4
EMS	EN55024, EN61000-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, IEC 61000-6-2
Safety	UL/cUL 60950
Shock	IEC 60068-2-27
Free Fall	IEC 60068-2-32
Vibration	IEC 60068-2-6
MTBF	267380 hours @ 25°C
Warranty	5 years