| Technology |
|
|
|
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE802.3x Flow Control and Back-pressure IEEE 802.3af Power Over Ethernet
| |
|
|
|
Store and Forward architecture | |
| Interface |
|
|
|
5 x RJ-45 for 10/100 Base-TX, Auto MDI/MDI-X | |
|
|
|
10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm(100m) 100Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm(100m) | |
|
|
|
Power x 3 (Green), Fault x 1(Red) PoE x 4(Green) Link/Activity x 5 (Green on / Green Blinking)@100Mbps, (Yellow on / Yellow Blinking)@10Mbps | |
|
|
|
Dry Relay output for port and power event alert. | |
| Performance |
|
|
|
14,880 pps for Ethernet 148,800 pps for Fast Ethernet | |
|
|
|
64 bytes to 1522 bytes (with VLAN tag) | |
|
|
|
|
|
|
|
|
|
| Power Requirements |
|
|
|
Input Voltage: 48VDC or -48VDC, dual inputs in terminal block connection AC /DC Power Adapter 48VDC/ 1.6A (option) Power input connector: Two Power inputs via the Terminal Block (12 ~24 AWG power cable) One DC jack for AC/D power adapter. Reverse Polarity Protection: Present | |
|
|
|
6.5Watts without PD loading 70Watts with PD full loading | |
|
|
|
Port 1~4 Per port 15.4W ability. RJ-45 pin assignment: TX (3,6), RX (1,2), V+ (4,5), V-(7,8)
| |
|
|
|
|
|
|
Switch 1~5: Port 1~5 link down alarm Enable/Disable Switch 6: Power fault alarm Enable/Disable. | |
| Mechanical |
|
|
|
DIN-rail kit and wall mounting | |
|
|
|
IP-31 protection, Aluminum case, Fanless design | |
|
|
|
33.8 mm (H) x 164.8 mm(W) x 108 mm (D) | |
| Environmental |
|
|
|
|
|
|
5% to 95% (Non-condensing) | |
|
|
|
| Regulatory Approvals |
|
|
|
FCC Class A, EN55022 Class A | |
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|