JetNet 5228G/ 5228G-DC Specifications

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control
IEEE802.1AB Link Layer Discovery Protocol
IEEE802.1v Protocol-based VLAN

Store and Forward Technology, 12.8Gbps Wire-Speed Switching

14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet

Typical: 64 bytes to 1536 bytes

Up to 9,216bytes

8K MAC

2Mbits

Cisco-Like CLI, Web, SSL, SSH, Backup/ Restore, DHCP Client, Warm reboot, Reset to default, Admin password, Port Speed/Duplex control, status, statistic, MAC address table display, Static MAC, Aging time, Dual Firmware images

Up to 9,216bytes

Link Layer Discovery Protocol to advertise system/
port identity and capability on the local network

SNMP v1, v2c, v3 and Traps.

MIB-II, Bridge MIB, VLAN MIB, SNMP MIB,
RMON and Private MIB

Simple Network Time Protocol to synchronize time

Online traffic monitoring

Static Trunk and 802.3ad LACP , Up to 12 Trunk Group, 2-8 ports per trunk

Ingress and Egress rate limiting

IEEE802.1Q VLAN, GVRP. Up to 255 VLANs

Direct client ports to uplink port

802.1v Protocol based VLAN

Double VLAN tag (QinQ)

Four priority queues per port,
IEEE802.1p COS and Layer 3 TOS/DiffServ

IGMP Snooping V1/V2 for multicast filtering and IGMP Query

Multicast VLAN Registration

Assign authorized MAC to specific port

IP security to prevent unauthorized access

Port_based Network Access Control

Layer 2+ ACL Security

Authentication, Authorization, Accounting

Relay DHCP request

Automatic warning by pre-defined events

Message logged to flash with different policy

802.1w RSTP, compatible with Legacy STP

IEEE802.1s MSTP each MSTP instance can include one or more VLANs.

10/100Base-TX: 24 x RJ-45, Auto MDI/MDI-X, Auto Negotiation
10/100/1000Base-TX: 4 x RJ-45, combo with SFP
1000Base-X: 4 x SFP with Hot Swappable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)

System: Power (Green), DIAG (Green)
10/100 RJ-45:
Link/Activity: Green = 100M, Yellow = 10M;
Duplex: On = Full, Off = Half
Gigabit Copper/SFP:
Link/Activity: Green = 1000M, Yellow = 10M or 100M;
Duplex: On = Full, Off = Half

DB9 Connector, Pin3: TxD, Pin2: RxD, Pin5:GND

1 set of AC input (JetNet 5228G)
2 sets of DC inputs (JetNet5228G-DC)

90-264V AC (JetNet5228G)
24VDC (12~48VDC, JetNet5228G-DC)

Maximum 20 Watts

19-inch, 1U Rack Mount

44mm(H) x 438mm (W) x 170mm (D)

2.65kg with package

-25 to 70°C

5% to 95% (Non-condensing)

-40 to 70 °C

FCC Class A, CE/EN55022. Class A

EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11

cUL (CSA22.2, UL60950-1)

IEC 60068-2-29

IEC 60068-2-32

IEC 60068-2-6