JetPort 5601f Specifications

Overview Specifications Ordering Information Datasheet

1-port RS-232/422/485 Fiber Serial Device Server  One-port RS-232/422/485 to Fiber Ethernet Solution One Multi-mode or Single-mode Fiber Port, maximum 2KM or 30KM distance Max. Serial Speed: 460.8kbps Secured Management by HTTPS and SSH Dual Power Input by 12~48VDC Terminal Block and 9~30VDC Power Jack. JetPort Commander, Korenix Windows Utility for Device Discovery, Multiple Device Setting and Monitoring. Versatile Serial Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP Up to 5 Simultaneous Serial Connections Event Warning by Syslog, Email, SNMP trap Embedded beeper for positioning Virtual COM Driver for Windows 2000/XP/2003/Vista

Network Interface
Ethernet	100BaseFX
Connector	100BaseFX: Duplex SC
Cables	Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM
Fiber Transceiver	JetPort 5601f-m, Multi-mode: 2KM max. distance Wave-length: 1310nm Min Tx Power:-19dBm Max Tx Power:-14dBm Min Rx Sensitivity:-30dBm Link budget:11dBm JetPort 5601f-s, Single-mode: 30KM max. distance Wave-length:1310nm Max Tx Power:-8dBm Min Tx Power:-15dBm Min Rx Sensitivity:-34dBm Link budget:19dBm
Protocols	IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, SNMP, HTTPS, SSH, SNTP, SMTP
Serial Communication
Number of Ports	1
Interface	RS-232/422, 2/4-wire RS485
Connectors	Male DB9
Baud Rate	110 bps~460.8 Kbps
Data Bits	5, 6, 7, 8
Parity	odd, even, none
Stop Bits	1, 1.5, 2
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD
RS-422	Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)	Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)	Data+, Data-,GND
Flow Control	XON/XOFF, RTS/CTS, DTR/DSR
Serial Line Protection	15KV ESD
Serial Line Protection	2*pin 120ohm DIP switches
Features
LED	Power 1/Power 2: Startup(Red); Ready(Green) Ethernet 1/Ethernet 2 : 10M Link(Orange), 100M Link(Green) Serial: Transmitting data(Green), Receiving data(Orange)
Configuration	Windows Utility-JetPort Commander, HTTPS, SSH
Serial Service	Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP
Reset	Software reload default, Hardware reset button
SNTP	For time management
Access IP Table	16 IP addresses to prevent illegal users
Monitor	Devices¡¦ status, VCOM status
SNMP	RFC1213 MIB II, RFC1317 RS232_like and SNMP Trap
E-Mail Alert	Automatic e-mail warning by pre-defined events
System Log	Trap to Syslog server or local display
System Events	Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected
TTY Driver	Fixed TTY driver for Linux
Windows Utility
JetPort Commander	Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards.
Serial Service Mode	Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP
Advanced Serial Setting	TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval time
Group Configuration Wizard	JetPort Commander: Group IP Wizard, Group firmware upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup Wizard
Power Requirements
System Power	PWR1: 12~48VDC in 2-pin Terminal Block PWR2: 9~30VDC in Power Jack with Power Adapter
Power Line protection	1 KV Burst (EFT), EN61000-4-4 0.5 KV Surge, EN61000-4-5
Mechanical
Dimensions	96.1mm(W)x99mm(D)x29.6mm(H)
Regulatory Approvals	FCC Class A, CE Class A , UL, RoHS
Environmental
Operating Temperature	-10 to 70°C
Operating Humidity	5% to 95% (Non-condensing)
Storage Temperature	-40 to 85°C (-4 to 185°F)
Warranty	5 years